MS-QA_06-2019 rev5

MS-QA 2019 9 Companion Guidance Section D— Example QA Plan Manual SECTION 2: MEASUREMENT SERVICES 2.1 QUALITY POLICY FOR MEASUREMENT SERVICES a) Measurement Quality: Our organization resolves to conduct measurements that are in compliance with approved standards including standards for quality control as prescribed in ANSI/AARST MS-QA. b) Measurement Quality Objectives: Our organization resolves to consistently produce, to the extent possible, reliable radon measurements to determine if radon mitigation is necessary in order to protect current and future occupants. 2.2 STANDARDS OF PRACTICE Our organization resolves to comply with NRPP recognized standards of practice when providing radon measurement and/or mitigation services, except as superseded by local statutes. Our Measurement Standard Specifications: For measurement of single family homes: (X) ANSI/AARST MAH: Protocol for Conducting Measurements of Radon and Radon Decay Products in Homes ( ) EPA: Protocols for Radon and Radon Decay Product Measurements in Homes (EPA 402-R-93-003, June 1993). For measurement of multifamily buildings: (X) ANSI/AARST: Protocol for Conducting Measurements of Radon and Radon Decay Products in Multifamily Buildings For measurement of schools and large buildings: (X) ANSI/AARST: Protocol for Conducting Measurements of Radon and Radon Decay Products in Schools and Large Buildings For quality assurance of measurement devices or systems: (X) ANSI/AARST MS-QA: Radon Measurement Systems Quality Assurance 2.3 JOBSITE STANDARD OPERATING PROCEDURES (SOP) Our organization resolves to collect and retain evidence of quality control. The following practices are standard practice for our organization. Deviations from these specifications and site specific information are tracked and retained for review on jobsite tracking sheets (Appendix 2-B and 2-B) 2.3.1 Test Devices All test devices used for deciding if mitigation is warranted are to be devices that are listed for having proven to meet minimum quality requirements by one of the following authorities: Two levels of quality commitment Commit to standards List standards that all staff working under this plan are to abide by. Jobsite SOPs Test Device Quality